ᐅ Avoid The Top 10 Mistakes Made By Beginning Juniper Bonsai

Juniper Bonsai

Avoid The Top 10 Mistakes Made By Beginning Juniper Bonsai

When most people who aren’t intimately familiar with the art of bonsai think of bonsai trees, a picture of the Juniper Bonsai tree or Juniperus procumbens likely comes to mind.

Juniper Bonsai is a very popular tree for beginners to start with because it’s easy to care for and aesthetically pleasing with little to no grooming.

This plant is thought to originate from southern Japan, and is normally no larger than 20 to 30 cm in height, but can reach widths in excess of 4 meters.

Juniper Bonsai

Image by Peter Hempel from Pixabay

It can also be found in coastal regions of Korea. The tree fully matures in 18 months time, and the branches will be intertwined to form dense material covered in spiny needles.

There’s beauty in simplicity, and the Juniper has that characteristic Japanese style that attracts the eye without being an eyesore. Bonsai can be pruned into almost limitless forms, by careful use of wire and shears, or even by the pot or tray that you use to plant it in.

Every tree is unique, and yet familiar, so there is a good chance you have seen hundreds of them and never knew that it was a Juniper.

There are countless other species of bonsai out there, but this is the favourite of many.
The Juniper can bring a sense of tranquillity to any setting, whether indoors or outdoors.

Juniper Bonsai Care

As in any garden, the key elements that your bonsai, plants need to grow are the right soil, the right amount of light, and the right amount of water. However, care bonsai involves meet certain requirements that municipalities do not have facilities.

For example, did you know that most bonsai are outdoor plants as their full-size counterparts? If you put a sun-loving bonsai inside, be prepared to give 12-16 hours a day of fluorescent light. However, there are a few bonsai plants that did not need much light, and these may be ideal especially if you want to practice bonsai care closed.

Another important factor is the care of bonsai, using the right soil. In the “wild” trees grow tall because of their deep root systems, which digs deep into the earth.

On the contrary, your bonsai grow in a tray or container, and then, your tree root system can not penetrate deeply down. Instead, spread over shallowly, thus reducing the growth of your tree.

For this reason, bonsai, plants need a special soil mix to ensure that their roots do not become water and drown. Because they are grown in these containers, regular potting soil is too dense, and too much water trap, killing the tree roots and finally the tree.

In practice proper bonsai care, you need to buy special bonsai soil, which is a mixture of clay, sand, and organics such as leaves, peat moss and mold.

What soil should you buy is specifically determined by the local climate.

Your local greenhouse or nursery, bonsai enthusiast, agriculture or the extension office can help determine what the soil is perfect for your bonsai care.

Water and food Bonsai Care, Of course, a question all beginner bonsai gardeners have is when the water is to be my bonsai? ” The answer to this important question bonsai care depends on what type of bonsai you have, how moist or dry air is about your bonsai, what time of ‘year, and other variables.

Ideally, the care of bonsai, you want a balance between too much and too little. Not above, but is not underwater.

Make sure your water is at room temperature, because you do not want your plant shock or with hot or cold.

If you use tap water, allow standing overnight so the chlorine and other chemicals can oxidize out of the water.

Wet the soil first, which will increase the capacity of the bonsai to take more water. Thereafter, up to soak the groundwater out of drainage holes in your training tray.

Make sure that the entire mass of the soil is wet. Watering is best done every day in the morning before the plant begins its daily cycle of photosynthesis.

You can also mist your bonsai on a daily basis to help maintain the necessary levels of humidity.

As for the fertilizer bonsai care, use a fully balanced fertilizer (ie 20-20-20, which is in equal parts of nitrogen, phosphorus and potassium) every two weeks to quarter strength.

A balanced fertilizer is ideal for bonsai care because the tree is considerably lower than that of the fertilizer plant is typically used for.

Do not fertilize a dry tree (the shock might kill him – make sure to water first!) Do not fertilize a sick tree, remember, fertilizer is not medicine.

With the right amount of water and electricity, along with proper soil and fertilizer, are on track to grow a beautiful collection of bonsai.

Bonsai care should not be difficult until you remember to meet their basic needs your bonsai plant is beautiful.

How often should you water in Juniper Bonsai?

There are multiple factors in determining when it’s appropriate to water or mist your bonsai:

  • Where the tree is located
  •  The temperature of the environment
  •  Lighting conditions
  •  Quantity of soil in the bonsai pot
  • Anything else nearby that can affect the humidity level

man watering bonsai Juniper Bonsai CareBonsai trees need to be watered more often than most plants, due to them being kept in relatively small pots, and with a free-draining type of soil that allows water to pass through it more quickly.

You can check to see if the tree needs to be watered by placing your finger in the soil just beneath the surface. If the soil is damp, then it’s fine, but if it comes up dry then you should water your bonsai immediately.

You may also pick up the pot and feel the weight of it. If the pot is still heavy with moisture, then it doesn’t need to be watered yet. If the pot is light, and the soil is dry, then it’s time to water your bonsai.

If you’re uncomfortable with these methods or simply want to use technology to aid you, there are moisture meters that can be placed in the soil that looks much like thermometers and will tell you when it’s time to water your bonsai.

Misting a bonsai tree helps take care of the foliage in the short term, and can be done frequently if you’ve placed the bonsai indoors. For lower maintenance, you can place the bonsai pot in a humidity tray and fill up the water again when it becomes empty.

When the water evaporates it creates a humid aura around the tree and tends to the foliage and keeps it supple. For maximum effect, place small pebbles between the pot and tray to keep the bonsai tree’s roots from resting in the humidity tray.

It’s possible to over-water a Juniperus procumbens and harm it, so use good judgement and be sure the soil is dry before watering.

How much sunlight does a Juniper Bonsai need?

The Juniper thrives best in outdoor conditions, with direct exposure to ultra-violet rays from sunlight.

It can live indoors too but will require more careful attention than an outdoor plant.

Be sure your tree gets direct exposure to light, or is no more than 1 foot from the light source. Eastern, western and southern exposures will work best, so be sure to arrange your bonsai to receive light from windows facing these directions.

If you do have to place it in a northern exposure, then be sure to use grow lights for up to 16 hours a day, placed no higher than 2 inches from the top of the tree.

Do not use incandescent lighting as it’s too hot and doesn’t provide the full spectrum of light necessary.

Should you use fertilizer on the Juniper Bonsai?

juniper bonsai outside Juniper Bonsai CareYes, be sure to use a fertilizer that provides nitrogen, phosphoric acid, potash, and chelated iron.

In general, a small amount should be fed to the soil in the spring, and a larger quantity in the fall to last the bonsai through the colder seasons.

First, water the bonsai as normal and then apply the fertilizer to the soil at half the recommended strength for normal plants.

It’s recommended to rotate fertilizer brands since each brand will contain different varieties and amounts of trace minerals. You may also want to add a specialized vitamin supplement to the fertilizer mix to further help your bonsai tree thrive.

As a simpler option, you may also want to place slow-releasing fertilizer granules on top of the soil, which will partially release nutrients as you water the plant as normal..

How to prevent disease and pests from harming the Juniper Bonsai

The most important aspects to keeping your bonsai healthy are the proper basics you’ve learned already, but here are some additional tips to keep your Juniper thriving:

  • Be sure the area is well ventilated
  •  Keep the soil clear of debris, such as spent leaves or foliage
  • Use an insecticidal soap spray on the foliage and limbs, which is human and animal safe

We hope you find this information helpful in caring for your Juniper Bonsai, and if you have any questions don’t hesitate to contact us with them.

Juniper Bonsai Pruning

Bonsai is a speciality of developing trees in little pots and holders. The trees developed to look like scaled-down assortments, yet indeed, are normal trees, which are prepared to develop in little sizes in little holders.

Indeed, even the foliage of these trees is developed in a wide range of styles.

How is this accomplished? The appropriate response lies in the correct procedures of growing a bonsai. One of the principal parts of growing a bonsai tree is pruning, which decides the size of the tree, just as the style as indicated by which it is developed.

Raising a Juniper Bonsai

Growing a bonsai tree isn’t that simple, except if you have adequate information on the correct strategies.

Be that as it may, among the entire parcel of trees which are utilized for developing as bonsai, juniper trees are liked, particularly for fledgelings.

Junipers are coniferous plants that have a place with the sort Juniperus and family Cupressaceae. There are around 50 to 70 types of junipers, which incorporate both tall trees and bushes.

A large portion of them have leaves like needles or scales. This conservative foliage is viewed as perfect for bonsai trees.

Aside from that, juniper trees can be effectively-prepared to make distinctive bonsai styles. Every one of these variables makes junipers exceptionally famous as bonsai and are developed both outside and inside.

Juniper species, for example, the Juniper Chinensis (Chinese juniper), Japanese nursery junipers, green hill, Sargent’s needle and shimpaku, are developed broadly as bonsai.

Juniper bonsai tree care is relatively simpler when contrasted with different kinds of bonsai. It incorporates, raising these bonsai trees by giving reasonable developing conditions, pruning and preparing to accomplish the ideal style.

Pruning in Bonsai Trees

As if there should arise an occurrence of some other bonsai, pruning is significant for juniper bonsai trees as well.

It is predominantly done to decrease the size of the tree and to accomplish the ideal style of foliage development.

A significant piece of bonsai pruning is performed at the underlying stages when an ordinary plant example is changed into a fit contender for developing as a bonsai.Juniper Bonsai

It might incorporate expulsion of the entire top bit of the tree. Such significant pruning makes the tree increasingly smaller in size and prepares it to develop according to the structures of the craftsman.

Customary pruning is a piece of bonsai care, just during the underlying years, after which it is seen as less serious. Pruning is a strategy, which requires great information, in order to maintain a strategic distance from harm to the bonsai tree and to control the uncontrolled development, which can give the plant, a rumpled look.

How to Prune Juniper Bonsai Trees

Presently, you realize that pruning is an indispensable piece of juniper bonsai care and it must be done appropriately.

Pruning of new buds is done all through the developing season.

While a few people utilize a couple of scissors to nip off the buds, it is likewise fought that scissor cutting may cause caramelizing of the cut finishes, ruining the vibes of the tree.

The training utilized for pruning juniper bonsai trees is known as finger squeezing, as fingers are utilized for this reason.

This method is likewise called nipping. If there should be an occurrence of juniper bonsai nipping, the buds are held between the tips of the thumb and pointer and contorted pointedly, in order to bring about a well put together.

For the most part, pruning is done following a month of development, which begins in spring. Squeezing off the developing buds will make the foliage increasingly reduced.

Care is taken to evacuate the old internal development, that may tumble off in June. All the crossed and dead stems must be evacuated.

In the event that the tree is being developed in a specific style, at that point pruning must enlarge that style or look after it.

Pruning should be possible ceaselessly all through the developing season, till mid-September. Juniper bonsai wiring is done after the pruning is done.

Despite the fact that juniper bonsai pruning is viewed as a simple assignment, a little aptitude is required to get the ideal outcomes.

Along these lines, obtain essential preparing or direct an itemized investigation to ace this craftsmanship

1 thought on “ᐅ Avoid The Top 10 Mistakes Made By Beginning Juniper Bonsai”

  1. Pingback: ᐅ 9 Secrets That Experts Of Orchid Care Don't Want You To Know

Leave a Reply

Your email address will not be published. Required fields are marked *